英国BURKARD PDE0006型自动微量点滴仪使用Burkard 1毫升全玻璃注射器,点滴量可分为从0.1到1.0μl不等的十等级。通过使用10毫升注射器和适配器可获取1.0μl—10μl的剂量范围。用器械前部的一个控制杆即可快捷地选择每种剂量。通过使用脚动或圆环式和指动开关,此微量施药器可在任何位置使用。广泛应用于实验室研究及化液体定量滴定工作上。例如应用于杀虫剂对某种昆虫的接触试验等。
产品特点
-低电压和低能耗
-操作方便、快捷
-英国BURKARD PDE0006型自动微量点滴仪由不含铁的材料构成,其组成部分经极度阳极处理或电镀为光亮的铬合金磨光表面
仪器组成
-主要电源供应装置250V A.C.—12V D.C.或者110V A.C.—12V D.C.
-Burkard全玻璃千分尺注射器
-皮下注射器针头3/10mm x 25mm
-圆环形开关和指型开关
技术指标
*大施药量 |
350μl |
规格(W×D×H) |
230*350*130mm |
千分尺基座 |
23cm x 23cm x 13cm |
净重 |
4.5kg |
毛重 |
6.5kg |
Product Description
Doses from 0.1 to 10 μl in twenty steps can be rapidly selected. The instrument may be used in any position, while low voltage and power consumption enables it to be operated from mains or battery using a foot or ring and finger switch.
Construction and Equipment Details
The applicator is constructed from non ferrous materials, with all components either Hard Anodised or Electro-plated. A single selector lever on the unit enables rapid selection of drop sizes from 0.1 μl to 1 μl and 1 μl to 10 μl in ten equal steps. Movement of the selector lever to the automatic rewind position retracts the micrometer spindle in approximately 50 seconds. The glass syringe is clamped or released by turning a single knurled screw.
The following equipment is supplied as standard:
- 1 Mains power supply unit. 240 V a.c. to 12 V d.c. or 110 V a.c. 12 V d.c.
- 1 Burkard all glass micrometer syringe luer fitting.
- 1 hypodermic needle 3/10 mm x 25 mm
- 1 ring and finger switch
Extra Equipment:
10 ml syringe and adapter for droplets up to 10 μl.